Results 1 to 3 of 3

Thread: 2015 Roof pins and striker plates replacement

  1. #1
    Join Date
    Mar 2013
    Location
    North Jersey
    Posts
    17

    Default 2015 Roof pins and striker plates replacement

    Purchased these new parts to try and repair my noisy top (in hot temps) as per the service bulletin.
    Question: How does the molding on the top of the windshield come off in order to access the striker plate fasteners?
    I’ve done a bit of prying but get no type of release.
    Don’t want to damage any trim pieces.
    Does anyone have a how to repair sheet?
    Any help appreciated.
    Last edited by Jersey Boy; 08-10-2020 at 05:17 AM.

  2. #2
    Join Date
    Dec 2011
    Location
    New Haven, Ct
    Posts
    956

    Default

    HI there,

    Unfortunately, you will have to remove the A pillar trim, drivers side knee bolster, both sunshades, rear view mirror and then pop the trim off to access it.

    Be careful of the wiring, its no fun!

    Allthebest, paul
    GM World Class Certified Service Technician.
    Like us on Facebook: www.facebook.com/corvettemechanic
    Twitter: www.twitter.com/GMvettemechanic

  3. #3
    Join Date
    Mar 2013
    Location
    North Jersey
    Posts
    17

    Default

    Thanks Paul.
    Much appreciated.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •