Search:

Type: Posts; User: c4c5specialist

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    2
    Views
    80

    Hi there, All my research does not give an...

    Hi there,

    All my research does not give an application.

    Allthebest, Paul
  2. #N202319660: Service Update - Valve Spring Failure - (Nov 20, 2020)

    #N202319660: Service Update - Valve Spring Failure - (Nov 20, 2020)

    NOTE: THIS RECALL IS VIN SPECIFIC AND YOU WILL RECEIVE A LETTER IF IT APPLIES TO YOUR VEHICLE

    Subject: N202319660 — Valve...
  3. Replies
    3
    Views
    139

    HI there, Also, please confirm that the recall...

    HI there,

    Also, please confirm that the recall was done at GM.

    The feedback relay that is installed at the recall can create inaccurate signals.

    If your battery has more than 12.5 volts and...
  4. #N202316880: Service Update - Transmission Control Module (TCM) Software Error

    Condition

    Certain 2020 model year Chevrolet Corvette vehicles may have a condition where diagnostic trouble codes (DTC’s) P1967 and/orP1968 may falsely set in the transmission control module...
  5. Yes, you would get a mailed notice. ...

    Yes, you would get a mailed notice.

    Allthebest, Paul
  6. #N202308320: Customer Satisfaction Program - Radio Display Inoperative

    Attention:

    All involved vehicles that are in dealer inventory must be held and not delivered to customers, dealer traded, or used fordemonstration purposes until the repair contained in this...
  7. #N202307690-01: Safety Recall - Driver Seat Belt May Not Lock in a Crash – US Only -

    Condition

    General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2020 model-year ChevroletCorvette vehicles. The seat-belt supplier for these vehicles...
  8. #17-NA-408: Information on Charge Air Cooler (CAC) Draining and Filling P0300

    The 6.2L V8 engine (RPO LT4), available in 2017-2021 Camaro ZL1 and Corvette models, features an Eaton Roots-type superchargerthat creates a maximum boost pressure of 67 kPa (9.7 psi). The air...
  9. I have a new one coming in Monday for a customer,...

    I have a new one coming in Monday for a customer, I will do a video this week.

    Allthebest, Paul
  10. Yeah, its tough to correctly seat the rear feet...

    Yeah, its tough to correctly seat the rear feet in the position cups.

    I will try to get a video together.

    Paul
  11. HI Jon, The panel requires a good amount of...

    HI Jon,

    The panel requires a good amount of force once the rear of the panel is lowered in first and place in the retainers

    The upper latches require a strong palm at both locations to...
  12. #17-NA-271: Clicking Noise from Front Wheels While Turning at Slow Speeds

    Important: DO NOT replace the wheels or brake rotors for this condition.

    If you encounter a vehicle with the above concern, follow the procedure below.
     1. Remove both of the front wheels. Refer...
  13. #17-NA-271: Clicking Noise from Front Wheels While Turning at Slow Speeds

    Important: DO NOT replace the wheels or brake rotors for this condition.

    If you encounter a vehicle with the above concern, follow the procedure below.
     1. Remove both of the front wheels....
  14. Replies
    0
    Views
    133

    N202302840 — Door Paint Chipping

    Certain 2020 model year Chevrolet Corvette vehicles may have a fender mounting bolt that is too long, and could come in contact with the door.


    Correction

    Dealers will inspect and replace...
  15. N202303030 — Park Brake Caliper Guide Pin Missing Retention Clip

    Condition

    Certain 2020 model year Chevrolet Corvette vehicles may be missing the park brake caliper guide pin retention clip. A dislocatedpin may damage the wheel.


    Correction

    Dealers...
  16. N202305250 — Restraints Control Module Internal Fault - Export Only

    Condition

    Certain 2020 model year Chevrolet Corvette vehicles may have a condition where the restraints control module software may infrequently set an internal fault.


    Correction
    ...
  17. N202311160 — Drivers May Overlook Open Hood Alerts

    General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2020 model-year Chevrolet Corvette vehicles. If drivers ignore the vehicle’s visual and audible...
  18. N202307690: Safety Recall - Driver Seat Belt May Not Lock in a Crash – US Only

    General Motors has decided that a defect which relates to motor vehicle safety exists in certain 2020 model-year Chevrolet Corvette vehicles. The seat-belt supplier for these vehicles inadvertently...
  19. N202309350-01: Non-Compliance - Interior Trunk Release Button Inoperative Ten Minutes

    General Motors has decided that certain 2020 model year Chevrolet Corvette vehicles fail to conform to Motor Vehicle Safety Standard (F/CMVSS) No. 401, “Interior Trunk Release.” These vehicles are...
  20. HI there, There is probably something rubbing...

    HI there,

    There is probably something rubbing on the inside of the window guide. You will have to remove the drivers door panel to see what is rubbing on the glass.

    We have seen the inner ...
  21. HI there, Im with Larry and Cornerman here. ...

    HI there,

    Im with Larry and Cornerman here. The next move it to determine what type of pressure you are dealing with.

    I normally will put a T in the fresh air pipe and cable tie a vacuum gauge...
  22. Replies
    2
    Views
    571

    HI there, No, it is not. This is due to...

    HI there,

    No, it is not. This is due to massive changes within the oiling system and the 0W40 Dexos 2 Mobil 1 that they are using.

    Allthebest, Paul
  23. Hi there, Place a vacuum gauge on the engine...

    Hi there,

    Place a vacuum gauge on the engine and see if you have a steady needle. This meaning about 17-19 inches of vacuum but the needle should not fluctuate.

    Let us know what you have.
    ...
  24. HI there, So I would surmise that you simply...

    HI there,

    So I would surmise that you simply have a seal that is done and needs replacing. I would definately use a mirror of some type to get between the steering rack and pinion and the engine...
  25. Yes, that is accurate.

    Yes, that is accurate.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4