PDA

View Full Version : Air Bag Warning Light



dp201
05-19-2014, 04:57 PM
I just removed the seats on my 2008 Z06 to do the 2012 seat upgrade which I got from Leatherseats.com. Beautiful leather, by-the-way. When I re-installed the seats, my airbag light is now illuminated. This is a 1LZ, so no airbags, warmers, or lumber support bladder. The wire connectors were a little confusing getting back together, especially the yellow one. There was also a third connector on the passenger seat that I don't recall disconnecting or even noticing and I can't find anything that it could plug into. Is there any way to determine which side the air bag light is picking up a problem with and which connector under the seat is for the air bags? Is it the yellow one? Thanks.

c4c5specialist
05-20-2014, 02:00 AM
HI there,

The air bags are the yellow connections. BUT, there are other connectors that can AFFECT the airbag light system.

Disconnect the negative battery cable FIRST< let the car sit for 5 mins.

Carefully disconnect the connections and then check to make sure there is no connector damage to terminals or pins.

Reconnect, if they do NOT fit together fairly easily with a slight bit of tension as they seat, it is WRONG and should be rechecked.

Allthebest, Paul