Hello , i just bought a 1997 c5 manual tranny and the syncros is out of 2 gear can anyone advise me on how hard it is to pull tranny and replace syncros and any other problems i might have tearing this apart ? car has 165 K on it? Thak you Tod
Hello , i just bought a 1997 c5 manual tranny and the syncros is out of 2 gear can anyone advise me on how hard it is to pull tranny and replace syncros and any other problems i might have tearing this apart ? car has 165 K on it? Thak you Tod
It is a fairly involved job to just get the tranny out. I'm not sure on the particulars of the internals on these trannies, but you will likely need some specialty tools (like a press) to separate some things.
For tranny removal, you need to remove the rear cradle assembly. To do that, the front assembly needs to be dropped also. Basically, you're nearly removing the entire powertrain in one "piece." It can be done with jacks, jack stands, and stuff in a garage, but it is much easier with a hoist. Try doing some Google searches for videos and stuff. I'd also invest in a set of Service Manuals for the car. This will give you all the specs and stuff you'll need.
2001 Dark Bowling Green Metallic Coupe - 6-spd and mods (400 rwhp)
2005 Aqua Blur SSR - 6-spd & LS2(Donna's hotrod), bone stock for now
There are currently 1 users browsing this thread. (0 members and 1 guests)